CallSend an enquiry →
+48 726 110 425 PL · EN · DE · FR · IT Request a quote
Services · CNC milling

CNC milling services from Poland — parts machined to your drawing

CNC milling services from Poland: we machine milled parts to the customer's drawing and 3D model — one-offs, spare parts, prototypes and series. 3PM Technology provides CNC machining services to companies across Poland and abroad, with process planning and CAM programming in Siemens NX.

Visualisation
Gearbox housing
Gearbox housingAluminium EN AW-6082

Scope of our CNC milling services

We mill housings, enclosures, brackets, base and mounting plates, manifold and valve blocks, rails and mechanism components. A typical part has pockets, channels, precision-fit bores and threads on several faces; we machine it from several sides in successive set-ups and, where a part needs stable support, in fixtures made specifically for it.

Within a single order we cut metric and pipe threads, engrave and mark contours, and machine parts after welding or heat treatment. Sub contract machining to drawing also includes a manufacturability review (DFM): before quoting, we check workholding, tool access, the number of set-ups and the risk of distortion.

Materials

Most of our milled parts are made from stainless and acid-resistant stainless steel 1.4301 (304), 1.4306 (304L) and 1.4404 (316L); the second large group is aluminium — EN AW-7075, 6082, 6012, 5083 and 5754. We also machine structural and tool steels (42CrMo4+QT, 1.2316, NC11LV at 58 HRC), brass CW614N, bronze CuSn12, cast iron and engineering plastics — PA, POM, PP, PET, PTFE and PEEK.

Machines and capabilities

Our CNC milling is carried out on three vertical machining centres:

  • Omnitec MVE-1100 — vertical machining centre, 3 axes; travels X 1100 · Y 600 · Z 600 mm; Fanuc, BBT40, 8,000 rpm
  • Neway VM1155HL — vertical machining centre, 3 axes; X 1000 · Y 550 · Z 560 mm; Fanuc, BBT40, 12,000 rpm
  • Omnitec MV-65SS — vertical machining centre, 3 axes; X 650 · Y 420 · Z 500 mm; Fanuc, BT40, 12,000 rpm

The largest part fits within X 1100 · Y 600 mm; round plates are machined up to Ø610 mm. Functional and datum surfaces are finished to a surface roughness of Ra 0.4. CAM programs and process sheets are archived, so repeat batches are produced with the same process.

Industries we supply

We supply milled parts for machine building, the pharmaceutical and food industries, hydraulics and pneumatics, automation and robotics, vacuum technology and motorsport. For maintenance departments we produce single spare parts — including parts without documentation, made from a sample.

Precision machining in Poland: how we work and quote

The cost of milling depends on the material, the number of set-ups, machining time and quantity, so we do not publish a price list — every part is quoted individually. For a quotation, a 2D drawing (PDF or DXF) and a 3D model (STEP) are enough, together with the quantity, material and quality requirements. The lead time is stated in the quotation. Any design comments are sent with the quotation — the decision always rests with the customer.

We work to an ISO 9001:2015 quality management system. Critical dimensions are checked during and after machining; an inspection report is prepared at the customer's request, and material certificates and certificates of conformity (CoC) are supplied as required by the order. Heat treatment, PVD coatings and surface treatments are coordinated with subcontractors. As a CNC manufacturing partner in Poland, our production plant is in Lublin, and we ship parts throughout Poland and abroad.

Examples

Milled parts — examples

Visualisation
Powder feeder paddle wheel

Powder feeder paddle wheel

Stainless steel 1.4404 (316L) · CNC milling

Paddle wheel for a powder feeder, milled entirely from a single plate of acid-resistant stainless steel 1.4404 (316L) — no welded arms. Eight curved arms and a hub with a Ø15 g6 spigot and an M4 thread.

Spigot Ø15 g6 · Ra 0.4 on all surfaces · arms machined from one piece
Visualisation
Gearbox housing

Gearbox housing

Aluminium EN AW-6082 · CNC milling

Elongated gearbox housing milled from solid. A dense row of accurately spaced mounting holes runs along its full length, with a stepped locating bore at one end.

Straightness over the length · hole spacing · locating bore
Visualisation
Vacuum installation base plate

Vacuum installation base plate

Stainless steel 1.4301 (304) · CNC milling

Large base plate for a vacuum installation, 610 mm in diameter and weighing 47.6 kg, made from stainless steel 1.4301 (304).

Ø610 mm · 47.6 kg · over 30 holes on pitch circles
Brake pedal arm

Brake pedal arm

Aluminium EN AW-7075 · CNC milling

Brake pedal arm for motorsport applications, operating under repeated cyclic loading. Made from EN AW-7075 — one of the strongest aluminium alloys used in machining.

Skeletonised structure · pedal pivot mounting holes
Visualisation
Valve spool end housing

Valve spool end housing

Aluminium EN AW-6012 T6 · CNC milling

Guide component in a control valve, combining a square mounting flange with a partially cut-away cylindrical seat that guides the spool. EN AW-6012 T6 combines low weight with good machinability and mechanical strength.

Precision-fit bores Ø9.5 / Ø12 · threads on multiple faces
Visualisation
Tablet press ejector

Tablet press ejector

Stainless steel 1.4301 (304) · CNC milling

Curved ejector in a tablet press. Thin-walled, crescent-shaped geometry with a variable radius, its cross-section resembling a blade profile. Stainless steel provides corrosion resistance and durability in cyclic operation.

Variable radius R115–R138 · precision-fit bore Ø8

For confidentiality reasons we do not disclose customer names or drawing numbers. Items marked “visualisation” are images prepared from photographs or documentation of parts we have manufactured. All projects →

Questions and answers

Frequently asked questions

More questions on the home page →
Do you mill one-off parts?

Yes. We take orders from a single part — prototypes, spare parts and short runs — as well as series production. Programs and process sheets are archived, so repeat batches are made with the same process.

What is the maximum size of a milled part?

Our largest machining centre, the Omnitec MVE-1100, has travels of X 1100, Y 600 and Z 600 mm. Round plates are machined up to 610 mm in diameter.

Which files do you need to quote for CNC milling?

Ideally a 2D drawing (PDF or DXF) and a 3D model (STEP), plus the quantity, material and quality requirements. Every enquiry includes a free manufacturability review.

Do you work for customers outside Poland?

Yes. We ship parts throughout Poland and abroad, and we handle correspondence and documentation in English and German as well.

Quotation

Send your drawing for a quotation

Attach a drawing or 3D model with the quantity, material and required delivery date. We check the part for manufacturability before quoting.

Send enquiry →
Email: piotr.bubicz@3pmtechnology.pl
Phone: +48 726 110 425
Production plant: ul. Mariana Rapackiego 12, 20-150 Lublin, Poland

See also: CNC turning services · Reverse engineering of spare parts · Stainless steel machining · Aluminium machining · Steel CNC machining · Plastic machining