
Brake pedal arm
Brake pedal arm for motorsport applications, operating under repeated cyclic loading. Made from EN AW-7075 — one of the strongest aluminium alloys used in machining.
Aluminium machining services: we mill and turn parts in EN AW-7075, 6082, 6012 T6, 5083 and 5754 — lightweight structures, housings, frames, brackets, plates and valve blocks. One-offs, prototypes and series to the customer's drawing.

In aluminium we make skeletonised arms and levers, gearbox and mechanism housings, adjustment and mounting brackets, base plates with pockets, discs with channels, valve and manifold blocks, and turned pistons. With lightweight structures the aim is usually to reduce weight without losing stiffness — we mill thin ribs and pockets with distortion control, and support long parts along their full length.
On 5754 aluminium plates we also produce multi-level contour engraving with sharp edges and an even depth.
EN AW-7075 — one of the strongest alloys used in machining; we use it for cyclically loaded components (motorsport, pedal arms), valve blocks and reproduced spare parts. EN AW-6082 — housings, plates, rails and brackets. EN AW-6012 T6 — low weight and good machinability, for example a valve spool end housing with precision-fit bores Ø9.5 / Ø12. EN AW-5083 and 5754 — base plates, discs and engraved plates.
Aluminium is milled on three vertical machining centres — Omnitec MVE-1100 (X 1100 · Y 600 · Z 600 mm), Neway VM1155HL and Omnitec MV-65SS (12,000 rpm) — and turned on three CNC lathes. We machine from several sides, with dense thread patterns on several faces; functional surfaces are finished to Ra 0.4. Coatings and surface treatments are coordinated with subcontractors.
Motorsport (pedal arms, housings for control mechanisms and actuators), hydraulics and pneumatics (valve blocks, pistons), vacuum technology (mounting bodies), machine building (gearbox housings, plates), process engineering (multi-port rails) and maintenance — including parts reproduced from a sample.
The cost of aluminium machining depends on the alloy, quantity and machining time — every part is quoted individually. Send a 2D drawing and a STEP model with the alloy, quantity and requirements. Every enquiry includes a free manufacturability review — for lightweight structures we may suggest, for instance, internal radii or rib thicknesses that shorten machining time. The lead time is stated in the quotation. We work to ISO 9001:2015; our plant is in Lublin, and we ship parts throughout Poland and abroad.

Brake pedal arm for motorsport applications, operating under repeated cyclic loading. Made from EN AW-7075 — one of the strongest aluminium alloys used in machining.

Guide component in a control valve, combining a square mounting flange with a partially cut-away cylindrical seat that guides the spool. EN AW-6012 T6 combines low weight with good machinability and mechanical strength.

Elongated gearbox housing milled from solid. A dense row of accurately spaced mounting holes runs along its full length, with a stepped locating bore at one end.

Moving component of a hydraulic system, made from a high-strength aluminium alloy with good dimensional stability and fatigue resistance.

Mounting body with a central pyramid-shaped pocket and a stepped flange with fixing holes — a component of a vacuum installation.

Large-diameter disc with a network of milled channels and hole patterns on several pitch diameters.
For confidentiality reasons we do not disclose customer names or drawing numbers. Items marked “visualisation” are images prepared from photographs or documentation of parts we have manufactured. All projects →
EN AW-7075, 6082, 6012, 5083 and 5754 — milled and turned. The choice of alloy can be discussed during the manufacturability review.
Yes, for example pedal arms and levers for motorsport. We mill thin ribs with distortion control while holding the position of the mounting holes.
Yes, if the operating conditions allow it. One example is a manifold block rebuilt in EN AW-7075 as a more durable alternative to the original material.
Coatings and surface treatments are coordinated with trusted subcontractors — the customer receives the finished part from a single source.
Give the alloy, quantity and requirements, and attach a drawing and a 3D model. We check the part for manufacturability before quoting.
Send enquiry →See also: CNC milling services · CNC turning services · Reverse engineering of spare parts · Stainless steel machining · Steel CNC machining · Plastic machining